Fazua ride 60 Unlock Chip

Unlock your Fazua Ride 60 ebike today!

Introducing the Fazua Speed Unlock Chip—a revolutionary accessory that unlocks the true potential of your Fazua e-bike and takes your riding experience to new heights. The Fazua Ride 60 system is already renowned for its lightweight, sleek design and smooth power assistance, but with the Unlock Chip, you can tap into an unprecedented level of performance.

Increasing the speed limit of your Fazua e-bike removes the constraints and grants you the freedom to ride faster, empowering you to cover more ground and experience the thrill of higher speeds, all while maintaining the efficient and enjoyable assistance of the Fazua system.

Don't miss out on the Fazua Ride 60 Unlock Chip—it's the ultimate upgrade for your e-bike. Unlock a world of possibilities, redefine your riding experience, and enjoy the freedom to explore like never before. Get ready to elevate your e-bike journey and unleash the full potential of your Fazua Ride 60 system.

This Fazua Speed Unlock chip is an ebike tuning solution that allows you to remove the 25 kmH speed block and increase active assistance up to speeds that can reach 60 KmH by fully exploiting the potential of the Fazua ebike

This tuning is specially designed for the Fazua ride 60 systems both with Fazua led HUB + Ring Control and with Fazua Control HUB mostly mounted on Riese and Muller, Canyon, Focus, Transition Bikes, Pivot Cycles, Wilier and Haibike Lyke.

Activation and Deactivation

All SpeedFun Furious Evo speed release devices have the ability to be active or inactive at any time and without the light output. By following the simple process below

Steps to activate or deactivate the Fazua speed unlock chip

1. Turn off the ebike.
2. Place the chain on the longest gear (the smallest rear sprocket).
3. Position the left pedal at 11.00. From now on, do not turn the rear wheel.
4. Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).
5. Lift the rear wheel off the ground Don't spin the rear wheel (not yet ..).
6. Give a strong pedal stroke (only one). Let the wheel spin over 30 km / h for a few seconds.
7. The system recognizes the rotation acceleration and interprets it as a command to activate or deactivate
   (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real
   to manipulated in the manner described above. When deactivated, the speed changes from manipulated to
   real on the display and the bike returns to its original condition.

See more about the  Ride 60 drive system

If you have the Fazua Evation Drive system,  Please see here for more Fazua Speed Unlock options

Installation Instructions Fazua Ride 60 Instructions